This article provides a step-by-step guide as to how a Writer user can quickly and easily write a suitability report confirming their recommendations for consolidating a client's pension schemes into an existing pension.

The process of creating a pension switch report in Genovo is very quick and straight forward. Assuming you have all the research to hand, have an active integration which allows you to add up to date client and plan details with a couple of clicks and details of your investment proposition preloaded into your investment library, you should be able to write this kind of report in around 30 minutes in Genovo.

1. Select or add the client

From the Genovo main dashboard, go to Write report and select or create the private client you wish to write the report to.

2. Select the Report Creation Method

This article walks you through the steps of building the report using Genovo’s 'from scratch' report creation method. However, other report creation methods are available which can make the report building process even quicker.

3. Create the report

In Report Details, give the report a name and select the Report Type. Assuming you're creating the report 'from scratch', we'd suggest using the Suitability Report. However, it is also possible to use the Review Report 2.0.

4. Add the required sections

You’ll then be directed to the Report Builder where you should add the necessary sections from the 'Available sections' drop down, which in this instance will be:

4.1. The review sections

• Review of Your Existing Pension Plans for uncrystallised plans, or
• Review of Your Existing Retirement Income Plans for crystallised or partly crystallised plans

4.2. The recommendation sections

• New Pension Recommendation for uncrystallised plans, or
• Drawing Benefits from Your Pension Funds for crystallised or partly crystallised plans

4.3. The investment strategy

• Recommended Investment Strategy

5. Complete all section wizards

Next, you'll need to step through the section wizards of all sections that require your input, as follows:

5.1. The Introduction section 

Progress through the steps of the Introduction section in the usual way. When you reach the Client Objectives step you should select or add the advice option(s) that accurately reflect the client's objective(s) and add comprehensive Know Your Client (KYC) information to ensure you fulfil the regulator’s expectations of you in terms of documenting a client's objectives.

There’s a Genovo advice option specifically for replacement business:

‘Consolidate your existing *investments and / or pensions* where appropriate, so it is easier to manage your investment portfolio and see how it is performing.’

Once you’ve selected this option, you can click on the Edit Objective / Add KYC info link to tweak the objective wording to suit the client’s actual objectives and to add the KYC info – the ‘back story’ behind the client’s desire to consolidate plans.

Of course, you can add your own Advice Option if you prefer, or you can enter the client’s objectives by typing or pasting in external content by clicking the Add objectives as freetext button.

5.2. The Client Risk Profile section

It's in this section that you will confirm the client's attitude to risk and capacity for loss, as well as their knowledge and experience and any investment preferences.

5.3. The review section

First – whether its Review of Your Existing Pension Plans for uncrystallised plans, or Review of Your Existing Retirement Income Plans for crystallised or partly crystallised plans, you’ll be prompted to provide an overview of the existing plans within the Plan Summary step.

Just click the Add Plan button and you’ll be shown a new window where you can enter all the required plan details. If your Genovo account is integrated with your back-office app (and you’re working with an integrated client), adding plans is even easier – just click the Add plans from CRM button and chose which plans you want to import.

Next, complete the Benefits & Features step – very important for pension switching recommendations.

Next, summarise the ongoing charges of the plans being reviewed in the Current Plan Charges step.

In the Recommended Action step, you will need to confirm what action you are recommending in respect to each plan. For all plans being switched, you should select either:

• 'switch' - if you’re recommending the plan is switched in its entirety, or
• ‘partially switch’ - if you’re recommending that the ceding plan remains in force (useful for advising on partial switches from current active workplace pensions, where the employer won’t contribute to the employee’s new plan).

You should ensure that after you’ve selected the appropriate Recommended Action, you also add some associated Advice Reasons - this is the ‘why’ part of the advice. Just click the Add advice reason hyperlink and then select from any of the standard advice reasons, or of course, you can add your own custom advice reason.

You can then confirm any disadvantages associated with the recommendation being made in the Key Disadvantages and Tax Implications step.

Finally for this section, because this is replacement business, you will also be prompted to compare the following aspects of the ceding and receiving plans in the Plan Comparison steps.

• Plan Charges - Quantify the difference in the Total Annual Recurring Charge of the existing plan and the new plan that is being recommended to replace it
• Reduction in Yield (RIY) – Compare the RIY of the existing plan and the new plan that is being recommended to replace it.
• Performance – if performance has been cited as a factor for replacing the current plan, we would expect to see supporting information here.
• Death Benefits – allows you to record a ‘before & after’ position regarding the plan’s death benefits

5.4. The Recommendation section

Just as with the review section above, your first task is to add the plan(s). Just as with the review sections, this is either done manually by clicking the Add plans button, or if your Genovo account is integrated with your back-office app (and you’re working with an integrated client), click the Add plans from CRM button and chose which plans you want to import.

Next, you’ll complete the three ‘why’ steps for the new plan recommendation – Why Product Type, Why Contribution and Why Provider / Plan.

After the ‘why’ steps, complete the Plan Charges step (the Total Charge value from this step will be needed in the Plan Comparison: Plan Charges step in the review section detailed above). If the provider / plan you’re recommending is one that you frequently recommend, consider using the Plan Charges Profiles Library so that some of the charges can be pre-populated in this step.

Next, complete last three steps of this section:

• Plan Features and Benefits step (which the client can use to compare with the same step in the review section)
• Key Disadvantages & Tax Implications step to record any disadvantages the client will experience by switching plans. Remember that in Genovo, disadvantages are different to risk warnings, with the former being something that will happen and the latter being something that might happen. Disadvantages are selected by the user and risk warnings are automated.
• Other Solutions – this step (optionally) allows you to disclose what other solutions you considered, but discounted

5.5. The Recommended Investment Strategy section

Because you’re recommending a new plan, you’ll need to complete the Recommended Investment Strategy section to detail the investment strategy of the plan you’re recommending.

5.6. The Important Information section

This is the last wizard section you'll need to complete and is self-explanatory.

6. Tailor the structure of the report

Having completed all the section wizards you should then tailor the structure of your report by unchecking any sections you do not wish to include in your report; and then change the sort order of any sections to reflect your personal preferences.

You’ll find more information about how to remove sections from your report here.

You'll find more information about how to reorder the sections in your report here.

7. Create the report

Having created the framework of the report of the report with 98%+ of the content already included as an initial draft in the Report Builder, both Writer and Reader users can then make any final tweaks to the content of the draft report in the Report Editor. To open and edit the report in the Report Editor click Create / Edit report.